GPD XD+ VR Headphone Fix for CleanROM

Let’s keep it brief, as usual.
If your GPD XD+ shows speaker / headphone issues after flashing the latest CleanROM, please flash the file attached to this post on top of it.

The easiest way, if you are freshly migrating to CleanROM, is to just replace the boot.img file inside the CleanROM folder with the one from the link below prior to flashing. Alternatively you can also flash this fix via TWRP by going through the following menus:

  1. Install
  2. Install Image
  3. Select Image
  4. Select Partition to Flash Image: Boot
  5. Swipe to confirm flash

This fix will however revert you to stock 1.8GHz clock speeds, instead of the 2.1GHz CleanROM usually provides.

Important note: older XD+ models should stay away from this fix as the speaker / headphone fix is exclusive to the new XD+ VR model, flashing this fix on older XD+ models will actually introduce this very same issue, as the headphone jack configurations won’t match the hardware!

This fix is something that should only be flashed if you have speaker / headphone issues!

DOWNLOAD GPD XD+ VR Headphone Fix for CleanROM


  • Is there any way to know if we have the XD+ VR revision? Mine arrives this week, and I’d like to know before flashing if its possible.

    cleverdevilAugust 19, 2018
    • There is no way to tell before installation.
      Just install the revision 2 image, see if your headphone jack works as it should, and if not, flash the revision 1 image on top.

      Black-SeraphNovember 20, 2018
  • Thanks for this. Is there anyway to go back to the 2.1GHz clock speed once installed?

    DarrenFebruary 19, 2019

Leave a Reply